The Process

The refinishing process involves removing all the old caulking and thoroughly cleaning the surface to be refinished with a cleaning solution and then a mild etching solution is used to maximize the bonding process.

Next, the surface and surrounding area is dried. It is very important to remove any soap, film or any other contaminants. Bathtub chips or any imperfections that the surface may have are filled, after that has dried they are sanded, filled again, and sanded down smooth.

After that, the walls, floor, and any fixtures are masked off. The bathtub is solvent wiped to remove any contaminants, and an adhesion promoter is applied. The bathtub is wiped down a final time with a tack cloth to remove any further contaminants, and then several coats of an acrylic urethane is applied to the bathtub. Finally, the bathtub is re-caulked with a mildew resistant silicone caulking.

Your refinished bathtub is ready to use in 24 hours!

Now Serving: San Jose, Campbell, Cupertino, Fremont, Gilroy, Los Altos, Los Altos Hills, Los Gatos, Milpitas, Monte Sereno, Morgan Hill, Mountain View, Palo Alto, San Mateo, Santa Clara, Saratoga, & Sunnyvale

For more information, please call One Day Bathtub Refinishing at (408) 940-1025